KitchenAid KOMC 9610/IX Instruções de Utilização descarregar pdf (Página 8)

Important: Do not use water pressure cleaners or steam cleaners.

Oven exterior and internal frame of the oven

• Clean with a damp cloth. If it is very dirty, add a few drops of

washing up liquid to the water. Wipe with a dry cloth.

• Do not use corrosive or abrasive cleaning products, which could

dull the surface. If one of these products should accidentally come

into contact with the oven, clean it with a damp cloth immediately.

• Slight differences in colour in the front part of the appliance are

due to different materials such as glass, plastic and metal being

used.

Accessories

• Soak the accessories in water with washing up detergent

immediately after use. Food residues can be easily removed using

an appropriate brush or a sponge.

Oven cavity

• Do not use abrasive sponges or pan scourers. Use specific

cleaning products for ovens and follow the manufacturer’s

instructions.

• Leave the oven to cool after each use then clean it to prevent

ingrained dirt forming as a result of residue food.

• During prolonged cooking or cooking on several levels, especially

in the case of food with a high water content (pizza, stuffed

vegetables etc.), condensation can form inside the door and on

the seal. When the oven is cool, dry the part inside the door with

a cloth or sponge.

• Clean the glass on the door with an appropriate liquid cleaning

product.

• The oven door may be removed to facilitate cleaning. The upper

heating element on the grill (Top oven in certain models) can be

lowered to clean the upper part of the oven.

Cleaning the runner grids and enamelled side panels (Lower oven)

• To clean the runner grids, remove them once the oven has cooled

down (see figure)

• To clean the enamelled side panels (see figure), remove the runner

grids as shown in the previous point and, using a coin or

screwdriver, remove the screws holding on the panels (see figure).

• The enamelled panels can be washed with washing up liquid. Do

not use rough sponges or scourers as this could damage the paint.

• Once dry, replace the enamelled side panels and grids, following

the reverse procedure. The arrow symbol stamped onto each

enamelled panel indicates the hole to use to fit them in properly.

Care and maintenance

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

KitchenAid KOMC 9610/IX Instruções de Utilização Página 8