KitchenAid KHIT 6010/I Instruções de Utilização descarregar pdf (Página 4)

• To make the most of your new appliance, please read the user instructions carefully and keep them

handy for future consultation

Before using the glass ceramic hob

Hob

• The Hob has to be set into a worktop between 20 – 50mm

deep.

• The distance between the lower face of the glass ceramic

hob and the cupboard or separating panel must comply

with the sizes shown in figure “A”.

• If a column cabinetry unit has to be installed next to the

cooktop, leave a distance of at least 100mm from the edge

of the cooktop.

Cut out the hole in the work surface to the dimensions shown in

the enclosed description sheet.

Clean the work surface, then apply the gasket around the cooktop

( unless it has been already installed).

Important

In order to prevent the electronic circuits overheating and becoming

damaged, we recommend the following:

• Do not install the hob near a dishwasher, or washing

machine as steam or moisture could damage the electronic

controls.

If an oven is installed underneath the hob (from our range of ovens)

please ensure the oven is equipped with a cooling system and the

installation observes the distances shown in figure "B".

Do not place any material between the hob and oven (Cross beams,

panels, brackets etc.).

If the oven is fitted with a self cleaning system (pyrolitic function) do

not use the hob, whilst cleaning the oven.

If the temperature of the electronic circuits exceeds the maximum

permitted temperature, the hob will automatically switch off; in this

case, wait for a few minutes until the of the electronic circuits cool

down, at which point it will be possible to turn the hob on again.

• Turn the hob off after use.

Installation

Front

Rear wall

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

KitchenAid KHIT 6010/I Instruções de Utilização Página 4